GP: What are user-defined fields and when are they used
...ware. GAGEpack provides a variety of options for customizing the software to individual needs. User-defined fields allow you to define a field that is not already in GAGEpack. For instance, if you sor...
- ST: When should you recalculate control limits?
...
Eventually, everyone using SPC charts will have to decide whether they should change the control limits or leave them alone. There are no hard and fast rules, but here are some thoughts to help you...
- ST: Multiple control limits - A long shot, or just a bad slice
...o trouble.
Knowing when to recalculate control limits is important, as quality managers know. The... filter and range of subgroups. One set is always defined as "active" limits.
In a production sett...
- SP: You must have at least 1 set of custom control limits
Revision Date: 2005-09-08
Problem:
"You must have at least 1 set of custom control limits" appears when you are working with custom attributes control limits. These control limits disappear after ...
- SP: You must have at least 1 set of custom control limits
Revision Date: 2005-09-08
Problem:
"You must have at least 1 set of custom control limits" appears when you are working with custom attributes control limits. These control limits disappear after ...
- SP: How can I change the order of the data that is displayed
...n which the data is entered. If the "Order by:" field is changed to something different AND control limits have been computed, it is advised that the control limits are also calculated using the same ...
- SP: Control limits do not appear to line up or match the desired scale
Revision Date: 2005-09-08
Problem:
Control limits do not appear to line up or match the desired scale.
Solution:
1. Make sure that the moving average in Type matches the set n in Limits. A....
- SP: Control limits that were left blank are adjusted automatically
Revision Date: 2005-09-08
Problem:
Control limits that were left blank are adjusted automatically after you have selected Control limits are specified by the user.
Solution:
Download an...
- CR: Invalid procedure call or argument (DeleteNamedLimits)
...
Problem:
The following error messages appears when trying to delete control limits: "Delete limits from file: Name" "Invalid procedure call or argument (DeleteNamedLimits)" Whe...
- ST: 4.5.3. Determining the total percentage outside the specifications
Revision Date: 2005-09-07
The total percentage outside the specification limits or requirements is found by adding the percentage outside the upper and lower specification limit...
- SP: pqComm - Invalid port number
Revision Date: 2005-09-07
Problem:
This error message appears when the device setting is incorrect, even if it was okay initially.
Solution:
Disable the device for the group...
- SP: Sub or function not defined, unable to decrypt password
Revision Date: 2005-09-08
Problem:
"Sub or function not defined, unable to decrypt password" appears when you try to convert a database from SQCpack 2.0.
Solution:
1.Restart...
- SP: Sub or function not defined, unable to decrypt password
Revision Date: 2005-09-08
Problem:
"Sub or function not defined, unable to decrypt password" appears when you try to convert a database from SQCpack 2.0.
Solution:
1. Restar...
- SP: Sub or function not defined, unable to decrypt password
Revision Date: 2005-09-12
Problem:
"Sub or function not defined, unable to decrypt password" appears when you try to convert a database from SQCpack 2.0.
Solution:
Restart t...
- SP: There is a problem with the Subgroup Selection criteria
Revision Date: 2005-09-08
Problem:
If a Filter is present, it may be in error; look at the help for possible correction. This message appears as I am setting up a filter for an ODBC link.
Soluti...
- CR: Background on out-of-control test rules
...milar to this: 7 ascending 7 descending 1 beyond limits 2 of 3 beyond 2 sigma Within CHARTrunner y...sing the Setup/Preferences menu on the main form. Setting an active set of out-of-control tests will...
- SP: Why did my imported dates come into SQCpack as text identifiers?
...dow will open. E. Map the identifiers, characteristics, and observations to the fields that you defined. F. Select Do Import.
- SP: Why did my imported dates come into SQCpack as text identifiers
...dow will open. E. Map the identifiers, characteristics, and observations to the fields that you defined. F. Select Do Import.
- SP: There is a problem with the Subgroup Selection criteria
Revision Date: 2005-09-12
Problem:
There is a problem with the Subgroup Selection criteria. If a Filter is present, it may be in error; look at the help for possible correction. This message app...
- MS: Path not found appears when you are setting up a Choice list from the Prompts tab
Revision Date: 2005-09-19
Problem:
"Path not found" appears when you are setting up a Choice list from the Prompts tab.
Solution:
Update your MEASUREspy INI file. This can ...