SP: How can I print charts and data with wider margins
Revision Date: 2005-09-12 Problem: My charts and data print too close to the edge of the page. How do I set wider page margins? Solution: If your charts are printing too close to the edges of the page, you can edit the SQCWIN30.INI file. To do this: 1. If you are running SQCpack for Windows ...
- SP: Print option is grayed-out
Revision Date: 2005-09-12 Problem: The Print option is grayed-out after you draw a chart and try to print. Solution: 1. If you are using Windows NT, check with your system administrator to see if you have rights to the printer. 2. Make sure that SQCpack has a printer selected. A. ...
- SP: Print data prints a blank page
Revision Date: 2005-09-12 Problem: A blank piece of paper is printed when you select Print Data. The print preview looks correct before printing, but not after. Solution: Change the printer driver. As of November 1999, instructions for this can be accessed at these sites. For Windows 95 use ...
- SP: Syntax error in query expression
Revision Date: 2005-09-12 Problem: "Syntax error in query expression" appears when I try to Print Causes and Notes for a particular control chart. Solution: Download an updated version of SQCpack 3.0.6 or higher from the SQCpack 3.0 Maintenance Release page. Follow the directions on the mainte ...
- SP: The first two times that I select Print and OK nothing happens. The third time I try, it prints
Revision Date: 2005-09-12 Problem: The first two times that I select Print and OK nothing happens. The third time I try, it prints. How do I get it to print the first time? Solution: Immediate solution: Select a different printer as the default printer. For example, if your default printer ...
- SP: GPF in PQSPC45.VBX or PQRPT21.VBX
Revision Date: 2005-09-12 Problem: "GPF in PQSPC45.VBX or PQRPT21.VBX" appears as you are trying to print. Solution: Download an updated version of SQCpack 3.0.6 or higher from the SQCpack 3.0 Maintenance Release page. Follow the directions on the maintenance release page. Ref #299
- SP: GPF in module PQSPC45.VBX
Revision Date: 2005-09-12 Problem: "GPF in module PQSPC45.VBX" appears when I close the window by clicking on the X in the upper right corner of the screen after I have sent a chart to a printer. Solution: Download an updated version of SQCpack from the SQCpack Maintenance Release page. Follow ...
- SP: No current record
Revision Date: 2005-09-12 Problem: "No current record" appears when I try to Print Causes and Notes. Solution: Download an updated version of SQCpack from the SQCpack Maintenance Release page. Follow the directions on the maintenance release page. Or, for a temporary alternative to download ...
- SP: When I try to print data for >50 subgroups, some of the data does not print
Revision Date: 2005-09-12 Problem: When I try to print data for >50 subgroups, some of the data does not print. What can I do about this? Solution: Immediate solution: Print data in smaller groups. Long term solution: Download an updated version of SQCpack 3.0.6 or higher from the SQCpac ...
- SP: An Auto Chart prints very small
Revision Date: 2005-09-12 Problem: An Auto Chart prints very small in the upper left corner of a page. Solution: Download an updated version of SQCpack from the SQCpack Maintenance Release page. Follow the directions on the maintenance release page. Ref # 296
- SP: GPF while printing a histogram
Revision Date: 2005-09-12 Problem: General Protection Fault errors (GPF's) appear when you print histograms Solution: Contact PQ Technical Support with Reference number 377. Ref #377
- SP: Print preview comes up blank and the print data does not print
Revision Date: 2005-09-12 Problem: Print preview comes up blank and print data does not print. How can I preview and print data? Solution: Immediate solution: If SQCpack for Windows is running from a network, create a file, TEMP.TXT in the root directory of the network drive where SQCpack f ...
