SP: Active X - PQ OIO - Method of Object failed
Revision Date: 2005-09-07 If you are receiving an error message when starting SQCpack there is something wrong with your database file or the install is not complete. These sort of error messages contain “PQ OIO” and/or “Method of object failed” * Make certain that you have proper rights t ...
- SP: Where to find MDAC components
Revision Date: 2005-09-07 If you did not install the MDAC components and need them, they are available on the Quality Suite CD and online at http://www.pqsystems.com/support/MDAC-DCOM.php. Run the file, mdac_typ.exe, to install the MDAC components. Information about the various versions of ...
- SP: The data format cells are all black
Revision Date: 2005-09-07 Problem: The format boxes on the bottom of the Data Editor are all black. This causes problems with data entry. Solution: To fix this: Open the Setup Menu and select Preferences. Click on the Group Data Entry tab. Change the color of the background from black to w ...
- SP: Data not being transferred from the data device
Revision Date: 2005-09-19 Problem: A new data device is set up within SQCpack 2000. When the data entry begins you notice that no data is transferred to the data entry screen. The cursor, however, is jumping to the next cell as if data had been entered. Solution: Click on Setup, then Data ...
- SP: Filters using the Like condition
Revision Date: 2005-09-07 The LIKE keyword behaves the same as EQUALS unless you use wildcards. For example Dec% returns records that start with 'Dec' Dec*- returns records that start with Dec and have any single character after that Ref # 747
- SP: SQCpack database format
Revision Date: 2005-09-07 Problem: SQCpack stores data in Microsoft Access databases. Depending on which release of SQCpack you are using, a different version Microsoft Access database format is used. Solution: SQCpack 2.0.x Access 2.0 format SQCpack 3.0.x ...
- SP: Device settings are not saved
Revision Date: 2005-09-07 Problem: When the user selects Setup, Data Device, then OK, the device settings are not getting saved. Solution: Select Setup, Preferences, Group Modify and ensure the path for the Data Device Folder is correct (for example C:\Program Files\PQ Systems\SQCpack 2 ...
- SP: Print a range of data vs. all of the data
Revision Date: 2005-09-07 Problem: Print data command cannot print a RANGE of data, only all of the data. Solution: Download an updated version of SQCpack 2000 version 4.0.96 or higher from the Maintenance Release page. Follow the directions on the maintenance release page. Ref # 777
- SP: CRC failure during password decrypt
Revision Date: 2005-09-07 Problem: Using SQCpack 4.6.62 or higher, the following error message is displayed when trying to open a group for data entry: CRC failure during password decrypt This may occur on groups for which you have not defined a password. Solution: To solve this problem ...
- SP: Where, exactly, is my SQCpack data
Revision Date: 2005-09-07 Problem: Customers occasionally need the ability to get directly to raw data which is stored in an SQCpack database. SQCpack data is stored in Microsoft Access database files. Although Access files typically have an .MDB file extension, SQCpack uses a .SQD file ext ...
- SP: File Already in Use - Error Opening Database on Novell
Revision Date: 2005-09-07 Problem: When you try to open a database that is located on a Novell NetWare server or that is already opened in another area, you may receive the following error message: Unable to open database: path_&_name_of_database.sqd [PqOio.OpenAccessDb(30)] ...
- SP: Statistics display on histogram overruns box
Revision Date: 2005-09-07 Problem: Statistics are displayed outside of the box. Solution: 1. Open the Histogram definition form. 2. Click on the Stat columns tab. 3. Un-check the field Fixed height statistics at the bottom of the form. If you are using a Histogram within a MultiChart, then ...
- SP: Data gets rounded when I enter it
Revision Date: 2005-09-07 Problem: After I enter data, it gets rounded. i.e. 7.58 becomes 7.6 Solution: Increase the number of decimals in the editor to show more decimal places. For example, if the data entry format is #.!, change it to #.!! to show data to two decimal places. Ref # 820
Version 4.0 (14)
